12mm Traklite Spacers
Traklite wheel spacers are designed for the track enthusiast to provide better handling and reduced weight for optimum efficiency. Made of 6061-T6 aerospace aluminum alloy, these spacers offer an aggressive look while maintaining full functionality, and are often used to allow for clearance when aftermarket big brake kits are installed.
Traklite wheel spacers are designed for the track enthusiast to provide better handling and reduced weight for optimum efficiency. Made of 6061-T6 aerospace aluminum alloy, these spacers offer an aggressive look while maintaining full functionality, and are often used to allow for clearance when aftermarket big brake kits are installed.
Traklite wheel spacers are designed for the track enthusiast to provide better handling and reduced weight for optimum efficiency. Made of 6061-T6 aerospace aluminum alloy, these spacers offer an aggressive look while maintaining full functionality, and are often used to allow for clearance when aftermarket big brake kits are installed.
/// 5X120 BOLT PATTERN SPECS:
Weight: 9.7oz per spacer (standard spacer is 15oz)
(2) quick removal slots
Center bore: 72.56mm
Hub: 5x120
Hubcentric with shank
Recommended stud length: 75-90mm
Sold in pairs
Maximum hub protrusion this spacer will accept is 12.5mm; shortening of the OEM hub may be necessary on rear.
/// NOTE: Extended bolts are required to use spacers properly. Stock length bolts are not long enough to use spacers safely.
/// Studs available here.