10mm Traklite Spacers
Traklite wheel spacers are designed for the track enthusiast to provide better handling and reduced weight for optimum efficiency. Made of 6061-T6 aerospace aluminum alloy, these spacers offer an aggressive look while maintaining full functionality.
Traklite wheel spacers are designed for the track enthusiast to provide better handling and reduced weight for optimum efficiency. Made of 6061-T6 aerospace aluminum alloy, these spacers offer an aggressive look while maintaining full functionality.
Traklite wheel spacers are designed for the track enthusiast to provide better handling and reduced weight for optimum efficiency. Made of 6061-T6 aerospace aluminum alloy, these spacers offer an aggressive look while maintaining full functionality.
/// 4X100 BOLT PATTERN SPECS:
Weight: 6.9oz per spacer
(2) quick removal slots
Center bore: 57.1mm
Hub: 4x100
Hubcentric with shank
Recommended stud length: 75-90mm
Sold in pairs
Maximum hub protrusion this spacer will accept is 12.5mm; shortening of the OEM hub may be necessary on rear.
/// 5X120 BOLT PATTERN SPECS:
Weight: 8.1oz per spacer
(2) quick removal slots
Center bore: 72.56mm
Hub: 5x120
Hubcentric with shank
Recommended stud length: 75-90mm
Sold in pairs
Maximum hub protrusion this spacer will accept is 12.5mm; shortening of the OEM hub may be necessary on rear.
/// NOTE: Extended bolts are required to use spacers properly. Stock length bolts are not long enough to use spacers safely.
/// Studs available here.